Leak Detection in Waiuku

Please clear a safe path to the tank outlet, pump and accessible valves, keeping storage away from electrical components. Let us know about buried pipe routes, previous alterations and any outlets supplied separately from the house. A sketch or photograph can help, even when the route is only approximate.

We may isolate sections to narrow down where pressure is being lost, managing pump operation during each check. Closing valves indiscriminately while the pump runs can create another problem. If access requires lifting a surface or exposing pipework, we explain the proposed location and extent before proceeding.

The findings should separate confirmed defects from areas still needing investigation. For example, visible leakage at a connection provides direct evidence, while pressure dropping in an isolated section points to a problem within that section. It may still take further checks or local exposure to locate the exact fault.

If a leak is confirmed in the tank supply line, we discuss whether a local repair is practical or whether the exposed condition supports replacing a longer section. Water main repairs may be appropriate for that supply pipe. If testing instead points to the pump or inlet, we explain that distinction.

After an agreed repair, we restore the supply in a controlled way and check pressure under demand and with outlets closed. We confirm whether the pump reaches its normal stopping condition and inspect the repaired area. Continued running means further assessment is needed before treating the original symptom as resolved.

At handover, we explain what was checked, what was repaired and any remaining uncertainty. We also identify anything you should monitor, such as pressure fading again or the pump restarting with no water use. Where access remains open, we clarify reinstatement arrangements and any further work still required.