Glenfield · Drainlayer
Drainlayer in Glenfield
Moving a kitchen means checking where its wastewater can go before cabinets and flooring lock in the layout. Send the proposed sink position, appliance locations and existing drainage plans first.
- PGDB licensed
- Site Safe member
- Impac Prequal assessed
- Kiwi-owned since 2012
How it works
Call or enquire
Phone us or send the address and what you’re seeing.
We assess
A licensed Stately plumber looks at the job on site.
Clear quote
You get a plain explanation and a clear quote before work starts.
Job done and tidied
We finish the work and leave the site clean.
Stately covers Glenfield. For this job, the starting point is the route between the relocated kitchen and a suitable wastewater connection, with access, excavation and reinstatement planned around the building work.
Send the layout before fixing cabinet positions
Mark the old and proposed kitchen positions on one plan. Include the sink, dishwasher, island footprint and any planned floor changes. Send photographs of accessible pipework, the outside wall nearest the kitchen and the ground along possible routes. Add the builder’s programme so drainage work can be coordinated with structural work and floor finishes.
Explain which rooms must remain usable during construction. An island sink creates a different access problem from a sink against an outside wall. The onsite check establishes how the internal waste arrangement meets the drain and which parts of the proposed route need the designer’s input before excavation starts.
Locate the receiving drain and check levels
An existing pipe shown on a drawing is a starting point, not a confirmed connection position. We locate the receiving wastewater drain, check accessible junctions and establish its depth and condition at the proposed connection. Levels determine whether the intended route can carry discharge by gravity. Pipe sizing and falls are settled through onsite assessment and design.
Confirm ownership before planning the connection. Owners maintain private pipes, while Watercare manages public wastewater and Auckland Council manages public stormwater. Kitchen wastewater belongs in the wastewater system. Building or excavation near public wastewater pipes may require Watercare approval. Resolve that interface before the builder commits to a trench or floor opening.
More about drainlayer in Glenfield
Agree the excavation and approval boundaries
Mark the proposed trench, access points and surfaces to be opened. Check other buried services before digging. Agree where excavated material will sit and how people will move around the work area. For a route through a floor, coordinate the opening with the builder and designer rather than cutting around the cabinetry layout alone.
Consent requirements depend on the actual work. Use MBIE guidance and confirm the consent pathway with the designer or council. Restricted drainlaying requires an appropriately authorised person, whose authorisation can be checked through the PGDB register. If a new public wastewater connection is needed, programme Watercare’s application, inspection and completion process before installation proceeds.
Lay the run before closing the floor
Excavate the agreed route and expose enough of the receiving drain to make the connection properly. Prepare bedding, lay the specified pipework and fittings, and check alignment and levels as the run progresses. Provide access for future maintenance in the agreed positions. Repair or replace damaged pipe exposed within the agreed work boundary.
Coordinate the new drainage connection with the kitchen waste pipework and the builder’s floor programme. Agree how the redundant kitchen branch will be disconnected and sealed. Keep joints and the connection available for the required testing and inspection. Book those stages before backfilling or closing floor openings, with the inspection sequence matched to the approved work.
Test, record and reinstate the route
Test the installed drainage using the method required for the work. Check the connection and arrange the relevant inspection before covering it. Once kitchen fixtures are connected, coordinate discharge checks before normal use. Keep the builder informed of completion so cabinetry, floor finishes and outside surfacing follow the drainage checks.
At handover, provide records of the installed route, connection position, access points, testing and inspections. Include photographs taken before covering the pipework. Record how the old branch was sealed. Identify which excavated areas have been backfilled and which surfaces are reinstated or awaiting the agreed finishing trade.
Drainlayer: questions from Glenfield
Can the new sink use the old kitchen drain?
That depends on its position, level and condition. Send the layout first. The onsite check establishes whether the old drain offers a suitable connection.
Should cabinets go in before drainage?
Settle the route and access first. Complete concealed drainage work, testing and required inspections before cabinets or finished floors obstruct it.
What happens to the abandoned kitchen branch?
Agree its disconnection and sealing as part of the job. Record the closure location before covering it, so future work has a clear reference.
More help in North Shore
Read before you call
Google reviews
Rated Excellent
Real words from Auckland customers on Google.
Thomas was professional, fast and efficient. He explained things clearly, and honestly. We were about to leave for the South Island for the weekend, Thomas made sure the job was completed in good order before we left. He also checked-in with us periodically to ensure there were no further issues.
2 / 5